Ericsson
T28s and A26x8s Secrets:
*#06#
for checking the IMEI (International Mobile Equipment Identity)
>*<<*<*
for checking the firmware revision information (software release)
>*<<*<*>
1-row text strings. if pressing yes you can check the phones text programming
in currently selected language.
>*<<*<*>>
n-row text strings. if pressing yes you can check the phones text programming
in currently selected language.
The
Service Provider (SP) Lock
The
Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM
card. Once the cell phone is locked to a specific operator, if one inserts a
SIM card from a different operator the phone will refuse to accept it! The
cell phone will however accept another SIM card from the same operator.
To
activate/deactivate this lock one needs a special secret code that is not
available to the end user.
Here
is how to activate the menu:
<**<
Lock to Network? if pressing yes you have 5 attempts to enter NCK.
<**<<
Lock to Network subset? if pressing yes you have 5 attempts to enter NSCK.
Warning:
Your phone can be locked to a service provider FOREVER by doing this! If an
invalid code is entered all five times, the menu will exit and be deactivated!
Any further attempt to activate the NCK/NSCK lock Menu will result in the
response "Not allowed"! However the NCK/NSCK lock can be recover
through a direct clearing in the EEPROM.
Shortcut
for Last Dialed call menu
If
you for some reason don't want to enter the 'Last Dialed calls menu' by using
the 'YES' key you can use the following key stroke instead: First '0' then
'#'.
Ericsson
DH368, GF768, A1018s
Ericsson
DH368
Try
these Codes on your DH-368 phone:
1.
Power on.
2.
Press 904059 + 'MENU'
3.
'TEST SET' display ...
4.
Press 'YES' will display @ then press 1 'RCL' will turn light off and you will
see 'DONE'
5.
Press 'YES' will display @ then press 86 'RCL' display 'DONE' also you will
hear static... You can just enter the channel number (up to 1023) by pressing
'Yes' 3 'CLR' XXXX - channel number to enter a channel directly. You can also
see the signal level on channel by pressing 3 'MENU'. You can see the ESN
number by pressing 'YES' 1 'RCL' 96 in HEX format.
6.
Press 3 to exit, now you phone will power down and power up again. You can
install the phone number into the phone by pressing 923885 + 'MENU'
Ericsson
GF768
Edit
Greetings Tip
1.
Go to the Keylock menu.
2.
Set lock to Auto.
3.
Press YES then hold the left arrow untill the Greetings menu appears.
GF788
menu in your GF768 phone! (1)
1.
Go to the EDIT MENU and press YES.
2.
Type the number "2" and press YES.
3.
In "NAME" HOLD DOWN the "2" key untill the number
"2" apperars. Press YES.
4.
Press YES again (to save any position) then QUICKLY press and hold left arrow
(<) untill "SIZE" appears in the display.
5.Press
YES and choose "Full size". You now have the GF788 menu!
NB.
Confirmed working on version 970716 and 980318.
GF788
menu in your GF768 phone! (2)
1.Go
to MissedCall
2.
Empty the list
3.
Press the -> key for a second or two
4.
The option Menu size turns up
5.
Choose 'yes' and go from there
NB.
Confirmed working on version 990122.
GF788
menu in your GF768 phone! (3)
1.
Go and set the ring volume and press yes.
2.
When 'STORED' is displayed - keep the right button -> pressed until 'Extended
Menu' is displayed.
3.
Select "Activate" the menus and you now have lots of extra features
NB.
Confirmed working on version 980910
Ericsson
A1018s
(UN)LOCKING
YOUR ERICSSON A1018s TO SPECIFIC NETWORK :
A
way to (un)lock your cell phone on to the network:
1.
Press : <**<
2.
Then on the display appear and give you two choices: Lock to Network ? and
Lock to Network subset?
3.
Enter the NCK number (code is provided by the SP)
4.
You have 5 attemps to do this
5.
Then your cell phone will work 'only' with the network
Ericsson
GF788
*#06#
for checking the IMEI (International Mobile Equipment Identity)
>*<<*<*
for checking the firmware revision information (software release)
>*<<*<*>
1-row text strings. if pressing yes you can check the phones text programming
in currently selected language. (298 entries)
>*<<*<*>>
n-row text strings. if pressing yes you can check the phones text programming
in currently selected language. (160 entries?)
The
Service Provider (SP) Lock
The
Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM
card. Once the cell phone is locked to a specific operator, if one inserts a
SIM card from a different operator the phone will refuse to accept it! The
cell phone will however accept another SIM card from the same operator.
To
activate/deactivate this lock one needs a special secret code that is not
available to the end user.
Here
is how to activate the menu:
<**<
Lock to Network? if pressing yes you have 5 attempts to enter NCK.
<**<<
Lock to Network subset? if pressing yes you have 5 attempts to enter NSCK.
Warning:
Your phone can be locked to a service provider FOREVER by doing this! If an
invalid code is entered all five times, the menu will exit and be deactivated!
Any further attempt to activate the NCK/NSCK lock Menu will result in the
response "Not allowed"! However the NCK/NSCK lock can be recover
through a direct clearing in the EEPROM.
Shortcut
for Last Dialed call menu
If
you for some reason don't want to enter the 'Last Dialed calls menu' by using
the 'YES' key you can use the following key stroke instead: First '0' then
'#'.
Bat.
level indicator when turned OFF
When
the phone is turned off and the phone is not changing - the bat. level can be
seen for a short period of time by pressing the 'NO' key quick once (it has to
be quick!) and then wait for about 2 sec. The bat. level will now be shown in
the display at its normal position.
Access
menu without Sim card
To
access to the menu in your phone without having a card inside do the following:
type **04*0000*0000*0000# When display say "Wrong Pin" press NO and
you have access to the all menus: Info, Access, Settings, Calculator, Clock,
Keylock On?, Mail, Phone book. NOTE if you try this on your phone may stop at
Keylock On? menu and you´ll have to take your battery out to turn the phone
on again.
Free
phone calls using the GF788
This
trick has only been reported working on PREPAID GSM CARDS and in some
countries and with some sw versions.
The
prepaid GSM SIM CARD is a kind of "SIM card" which only has a
sertant amount of credit on it (like a normal phonebox telecard)... if it can
be traced? - we don't know...
Well..here's
the trick you dial the no. normally and press YES. While "connecting"
is shown on the screen, the following procedure should be carried out: Press
CLR then 0 then # and then NO (twice) so as to switch OFF the phone. You can
then still speak on the phone while it is switched off but the SIM card does
not record your calls which will lead to FREE phone calls in some countries..
we hope!!
Another
variant of the code
Make
a Call, while the phone says Connecting type 083# (the position 83 must be
empty! ), when phone says Pos Emtpy, press the NO key and turn off the phone.
If
you can make the call with the phone turned off you will face a problem when
you need to hang up the phone...the only way for you to do that is remove the
battery...???
Ericsson
GF768
To
return the language back to english on the ericsson GF768, just press left (
<-- ), zero four times (0,0,0,0), and then right ( --> ).
Ericsson
GH688
*#06#
for checking the IMEI (International Mobile Equipment Identity)
*#0000#
to reset the phones menu-language to English.
*#103#
then YES Time and date will be shown.
>*<<*<*
for checking the firmware revision information (software release)
>*<<*<*>
1-row text strings. if pressing yes you can check the phones text programming
in currently selected language. (298 entries)
>*<<*<*>>
n-row text strings. if pressing yes you can check the phones text programming
in currently selected language. (160 entries?)
The
Service Provider (SP) Lock
The
Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM
card. Once the cell phone is locked to a specific operator, if one inserts a
SIM card from a different operator the phone will refuse to accept it! The
cell phone will however accept another SIM card from the same operator.
To
activate/deactivate this lock one needs a special secret code that is not
available to the end user.
Here
is how to activate the menu:
<**<
Lock to Network? if pressing yes you have 5 attempts to enter NCK.
<**<<
Lock to Network subset? if pressing yes you have 5 attempts to enter NSCK.
Warning:
Your phone can be locked to a service provider FOREVER by doing this! If an
invalid code is entered all five times, the menu will exit and be deactivated!
Any further attempt to activate the NCK/NSCK lock Menu will result in the
response "Not allowed"! However the NCK/NSCK lock can be recover
through a direct clearing in the EEPROM.
Shortcut
for Last Dialed call menu
If
you for some reason don't want to enter the 'Last Dialed calls menu' by using
the 'YES' key you can use the following key stroke instead: First '0' then
'#'.
Bat.
level indicator when turned OFF
When
the phone is turned off and the phone is not changing - the bat. level can be
seen for a short period of time by pressing the 'NO' key quick once (it has to
be quick!) and then wait for about 2 sec. The bat. level will now be shown in
the display at its normal position.
Access
menu without Sim card
To
access to the menu in your phone without having a card inside do the
following: type **04*0000*0000*0000# When display say "Wrong Pin"
press NO and you have access to the all menus: Info, Access, Settings,
Calculator, Clock, Keylock On?, Mail, Phone book. NOTE if you try this on your
phone may stop at Keylock On? menu and you´ll have to take your battery out
to turn the phone on again.
Full
Operator List
You
can view the full operator list by doing the following: Go to the 'Edit list'
menu under 'networks'. The phone say 'please wait' (searching for other
networks). When finished, Press the < key once, then YES twice. Now the
phone displays the full list. Browse through the list with the < > keys.
Monitor
mod on Ericsson GH688
How
to enable net monitor on Ericson 688..
1.
Remove SIM from phone
2.
Dial 112, press YES, hear something
3.
Dial 112YESNO 4. Press <(left arrow) before SETTINGS
5.
Then YES, <(left arrow), then you will see NM on?
6.
press YES
Free
phone calls using the GH688
This
trick has only been reported working on PREPAID GSM CARDS and in some
countries and with some sw versions.
The
prepaid GSM SIM CARD is a kind of "SIM card" which only has a
sertant amount of credit on it (like a normal phonebox telecard)... if it can
be traced? - we don't know...
Well..here's
the trick you dial the no. normally and press YES. While
"connecting" is shown on the screen, the following procedure should
be carried out: Press CLR then 0 then # and then NO (twice) so as to switch
OFF the phone. You can then still speak on the phone while it is switched off
but the SIM card does not record your calls which will lead to FREE phone
calls in some countries.. we hope!!
Another
variant of the code
Make
a Call, while the phone says Connecting type 083# (the position 83 must be
empty! ), when phone says Pos Emtpy, press the NO key and turn off the phone.
If
you can make the call with the phone turned off you will face a problem when
you need to hang up the phone...the only way for you to do that is remove the
battery...???
-
Ericsson SH888
*#06#
for checking the IMEI (International Mobile Equipment Identity)
>*<<*<*
for checking the firmware revision information (software release)
>*<<*<*>
1-row text strings. if pressing yes you can check the phones text programming
in currently selected language.
>*<<*<*>>
n-row text strings. if pressing yes you can check the phones text programming
in currently selected language.
>*<<*<*>>>
IR version info. if pressing yes you can check the phones IR device's driver
version.
The
Service Provider (SP) Lock
The
Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM
card. Once the cell phone is locked to a specific operator, if one inserts a
SIM card from a different operator the phone will refuse to accept it! The
cell phone will however accept another SIM card from the same operator.
To
activate/deactivate this lock one needs a special secret code that is not
available to the end user.
Here
is how to activate the menu:
<**<
Lock to Network? if pressing yes you have 5 attempts to enter NCK.
<**<<
Lock to Network subset? if pressing yes you have 5 attempts to enter NSCK.
Warning:
Your phone can be locked to a service provider FOREVER by doing this! If an
invalid code is entered all five times, the menu will exit and be deactivated!
Any further attempt to activate the NCK/NSCK lock Menu will result in the
response "Not allowed"! However the NCK/NSCK lock can be recover
through a direct clearing in the EEPROM.
Shortcut
for Last Dialed call menu
If
you for some reason don't want to enter the 'Last Dialed calls menu' by using
the 'YES' key you can use the following key stroke instead: First '0' then
'#'.
Bat.
level indicator when turned OFF
When
the phone is turned off and the phone is not changing - the bat. level can be
seen for a short period of time by pressing the 'NO' key quick once (it has to
be quick!) and then wait for about 2 sec. The bat. level will now be shown in
the display at its normal position.
Access
menu without Sim card
To
access to the menu in your phone without having a card inside do the
following: type **04*0000*0000*0000# When display say "Wrong Pin"
press NO and you have access to the all menus: Info, Access, Settings,
Calculator, Clock, Keylock On?, Mail, Phone book. NOTE if you try this on your
phone may stop at Keylock On? menu and you´ll have to take your battery out
to turn the phone on again.
Ericsson
T28
*#06#
for checking the IMEI (International Mobile Equipment Identity)
>*<<*<*
for checking the firmware revision information (software release)
>*<<*<*>
1-row text strings. if pressing yes you can check the phones text programming
in currently selected language.
>*<<*<*>>
n-row text strings. if pressing yes you can check the phones text programming
in currently selected language.
The
Service Provider (SP) Lock
The
Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM
card. Once the cell phone is locked to a specific operator, if one inserts a
SIM card from a different operator the phone will refuse to accept it! The
cell phone will however accept another SIM card from the same operator.
To
activate/deactivate this lock one needs a special secret code that is not
available to the end user.
Here
is how to activate the menu:
<**<
Lock to Network? if pressing yes you have 5 attempts to enter NCK.
<**<<
Lock to Network subset? if pressing yes you have 5 attempts to enter NSCK.
Warning:
Your phone can be locked to a service provider FOREVER by doing this! If an
invalid code is entered all five times, the menu will exit and be deactivated!
Any further attempt to activate the NCK/NSCK lock Menu will result in the
response "Not allowed"! However the NCK/NSCK lock can be recover
through a direct clearing in the EEPROM.
Shortcut
for Last Dialed call menu
If
you for some reason don't want to enter the 'Last Dialed calls menu' by using
the 'YES' key you can use the following key stroke instead: First '0' then
'#'.